Windows

How to dual boot Linux and Windows

By admin April 23, 2024

How to dual boot Linux and Windows, Windows might be your bread and butter, but you can dual-boot it with Linux if you want to tinker, or play around with a wider range of open source software. Whether you’re using Windows 10 or Windows 11, you can install a range of different Linux distributions as a secondary operating system to give you the best of both worls.

Here’s how to dual boot Windows and Linux.

Microsoft

Start by installing Windows

The first step is to install Windows, assuming you’re starting from scratch. We have a full guide on how to install Windows 11, so make sure to keep that handy if you need extra detail. For dual booting, the process is largely the same minus one key difference.

Instead of allowing Windows to take up all of the space on your hard drive, you’ll allocate it a partition. If you have multiple hard drives for dual booting, you can allow Windows to take up the full space on your hard drive. This process works for Windows 10 and Windows 11, but we’ll be using Windows 10 for our example.

If you don’t have an extra Windows PC to create installation media, you can install Windows first before installing Linux (though you may need to fully defrag your hard drive to create a partition for Linux).

Step 1: With your spare PC, download the Windows Media Creation Tool and follow the steps to create installation media on one of your blank USB drives. Note: you may be asked to format the drive, which will remove all of the data.

How to dual boot Linux and Windows

Mark Coppock/Digital Trends

Step 2:Leaving your installation USB drive plugged in, turn off your PC. Turn it back on and select the F12 on your keyboard rapidly while the computer boots. This will take you to a boot menu. Select your Windows USB drive and continue.

Step 3:Follow the steps for the Windows installer until you reach the What type of installation do you want page. Choose Custom: Install Windows only.

Image used with permission by copyright holder

Step 4:You need to create a partition on your hard drive. You’ll likely see multiple partitions here unless you’re using a brand-new hard drive. Assuming you want to start from scratch, delete the partitions (note: this will remove all the data on your hard drive, so make sure your hard drive is backed up).

Step 5:Select your hard drive and select New to create a new partition. Set how large you want the partition to be and confirm. This will be the total amount of space Windows has access to, and you’ll need extra space to install Linux. We recommend splitting the empty space in half, allocating half to Windows and half to Linux.

Follow the remaining installation steps to finish.

How to Install Linux

Installing Windows first is a good idea because it makes installing Linux much easier. If you already have Windows installed, you can still dual boot Linux, but you’ll need to create a new partition on your hard drive.

We’ll be using Ubuntu for our example, but the process is similar for most Linux distros.

Step 1: Download the latest version of Ubuntu and store it somewhere you can easily access. Grab your second blank USB drive and insert it into your computer.

Step 2: Download balenaEtcher and open it up. Select your blank USB drive and your Ubuntu image and run the software to create your bootable Linux media.

Image used with permission by copyright holder

Step 3: Keeping your Linux USB drive plugged in, restart your computer and rapidly press the F12 key to enter the boot menu. Select your Linux USB drive to boot into the installation screen.

Image used with permission by copyright holder

Step 4: You will be able to try or install Ubuntu, so if you’re unsure about Linux, try out the OS first. It can run off of your USB drive, though with decreased performance. Once you’re settled, select Install Ubuntu to continue.

Select your keyboard layout and language and opt for a Normal installation. Make sure to check both boxes under the Other options section on this screen.

Image used with permission by copyright holder

Step 5: Ubuntu will automatically detect if you have Windows installed. Select Install Ubuntu alongside Windows 10 on this screen. The other option, Erase disk and install Ubuntu will remove Windows from your PC.

Step 6: If you started with a blank hard drive, you’re done. Finish the installation and use the boot menu referenced above to choose which OS to boot into (select the hard drive partition you want).

If Windows is taking up the entire drive, you’ll see a screen that allows you to allocate disc space to Ubuntu. Choose how much space you want to allocate and continue. We highly recommend creating a partition through Windows first, however, to avoid accidentally deleting data.

Most Linux distros will launch into a boot menu that allows you to select between Linux and Windows, but you may need to use the boot menu to choose which OS you want to load into.

How to dual boot Windows and Linux FAQ

Does dual boot slow down a PC?

No. Dual booting does restrict that quantity of storage space you have access to within each operating system, since you’ll need to dedicate drive space to not only the operating systems themselves, but their respective services, drivers, and applications. However, when you’re using either of the operating systems, you are not using the other one, so they don’t slow down your PC at all.

How do I share files between Windows and Linux on a dual boot?

The same way you would share files between two different computers running Windows and Linux. You can use a flash drive or external hard drive to manually transfer files between the two installations — the only difference is you don’t have to unplug the drive. You could use a cloud storage provider for the same purpose, or set up a shared folder on a partition both operating systems can access.

Depending on the files you’re transferring, there can be compatible issues, however, so consider the best way to transfer the data for your needs.

Windows is an operating system designed by Microsoft. The operating system is what allows you to use a computer. Windows comes preloaded on most new personal computers (PCs), which helps to make it the most popular operating system in the world.

Windows makes it possible to complete all types of everyday tasks on your computer. For example, you can use Windows to browse the Internet, check your email, edit digital photos, listen to music, play games, and do much more.

Windows is also used in many offices because it gives you access to productivity tools such as calendars, word processors, and spreadsheets.

Microsoft released the first version of Windows in the mid-1980s. There have been many versions of Windows since then, but the most recent ones include Windows 10 (released in 2015), Windows 8 (2012), Windows 7 (2009), Windows Vista (2007), and Windows XP (2001).

About this tutorial

This tutorial is designed to show you the absolute basics of using a Windows computer, including how to use the desktop, how to open different files and applications, and how to move and resize windows. The information in this tutorial will apply to more recent versions of Windows, including the ones mentioned above. However, once you’ve learned the basics, you may also want to review one of our version-specific Windows tutorials. Just select the version of Windows that’s installed on your computer:

• Windows 10

• Windows 8

• Windows 7

• Windows XP

Windows 8 vs. other versions

While most versions of Windows are relatively similar, Windows 8 works very differently from other versions. However, if you have Windows 8 on your computer, you should now be able to upgrade to Windows 10, which is more similar to earlier versions, including Windows 7. We recommend upgrading your computer to Windows 10 if you can. Review our Windows 10 tutorial to learn how.

However, we’ll still point out any major differences between Windows 8 and other versions, which means you’ll see some Windows 8-specific information from time to time. If your computer uses Windows 8, you’ll want to review both this tutorial and our Windows 8 tutorial to learn more about the differences.

Navigating Windows

Whether you’re new to computers or just Windows, it’s important to learn the basics of using your computer. If it all seems a little overwhelming right now, don’t worry! We’ll take you through it step by step and show you some of the most fundamental things you’ll need to know, including how to work with the desktop, open and close windows, and turn off your computer.

Watch the video below to learn the basics of navigating Windows.

The desktop

Once your computer has finished starting up, the first thing you’ll see is the desktop. You can think of the desktop as the main workspace for your computer. From here, you can view and manage your files, open applications, access the Internet, and much more.

Click the buttons in the interactive below to become more familiar with the desktop.

In Windows 8, you will usually see the Start screen before the desktop. To learn more, review our lesson on Getting Started with Windows 8.

Working with applications

An application—also known as a program—is a type of software that allows you to complete tasks on your computer. Windows comes with many built-in applications you can use. For example, if you want to browse the Internet, you can use Microsoft Edge (or Internet Explorer if you’re using Windows 8 or earlier).

To open an application:

1.Using your mouse, click the Start button, then select the desired application. If you don’t see the one you want, click All Programs to see a complete list of applications. In our example, we’ll open Microsoft Edge.

2.The application will appear in a new window.

There is no Start menu in Windows 8, so you’ll usually open applications from the Start screen. Click the Start button to go to the Start screen, then click an app to open it.

Working with windows

Whenever you open a file, folder, or application, it will appear in a new window. You can have multiple items open at the same time in different windows. You’ll use windows all the time, so it’s important to know how to switch between open windows, how to move and resize windows, and how to close windows when you’re done using them.

In Windows 8, some programs will open on the Start screen, not the desktop. If you’re using Windows 8, note that the information below applies only to windows you have opened on the desktop.

Parts of a window

You’ll see the same three buttons in the upper-right corner of almost every window. These buttons allow you to perform several functions, including these below.

• Click the Minimize button to hide the window. The window will be minimized to the taskbar. You can then click the icon for that window on the taskbar to make it reappear.

• Click the Maximize button to make the window fill the entire screen.

• If the screen is maximized, the Maximize button will be temporarily replaced by the Restore button. Just click it to return the window to its original size.

• Click the Close button to close the window.

To move a window:

1.Click and drag the top of the window to move it to the desired location on the screen. When you’re done, release the mouse.

2.The window will appear in the new location.

To resize a window:

1.Hover the mouse over any corner of the window, then click and drag the mouse to make the window larger or smaller. When you’re done, release the mouse.

2.The window will be resized.

Switching between windows

If you have more than one window open at the same time, you can quickly switch between them by clicking the icon for that window on the taskbar.

Shutting down your computer

When you’re done using your computer, it’s important to shut it down properly. The procedure will vary slightly depending on which version of Windows you’re using.

To shut down your computer:

• If you’re using Windows 10, click the Start button, then the Power icon, then click Shut down.

• If you’re using Windows 8, click the Start button to access the Start screen, click the Power icon near the upper-right corner, and select Shut down. If you don’t see this option, it means you’ll need to upgrade to Windows 8.1. Review this page from our Windows 8 tutorial to learn how.

• If you’re using Windows 7 or earlier, Click the Start button, then select Shut down.

Restarting and Sleep mode

You can also click the power button button for more options. For example, if your computer has become unresponsive, you can choose Restart to quickly turn it off and on again.

You can also choose to put your computer into Sleep mode. This turns off most of your computer’s processes, but it remembers which applications and files are open. It allows the computer to start up more quickly because you won’t have to wait for the operating system and applications to load. Note that your computer may go into Sleep mode automatically if you haven’t used it for more than a few minutes.

If you have a laptop, you can simply close the lid to put it into Sleep mode.

Waking your computer from Sleep mode

If your computer is in Sleep mode, you’ll need to wake it to use it. To wake the computer from Sleep mode, click the mouse or press any key on the keyboard.

What is Linux?

Linux (pronounced “linnucks”) is a monolithic, open-source kernel, and a family of operating systems based on that kernel. The Linux kernel was developed by Linus Torvalds, who announced it on the comp.os.minix newsgroup on August 25, 1991. Since then, it’s been ported to computer architectures including x86-64, x86, ARM, RISC, and DEC Alpha. It is licensed under version 2 of the GPL.

Developers can access all Linux source code, and are permitted under the license conditions to modify and distribute it.

Where is Linux used?

Presently, Linux is used by several million users worldwide. The composition of users varies from private users, training centers, universities, research centers, and companies. Below are examples of where Linux is used today.

• Android phones and tablets – Android phones and tablets use a form of Linux.

• Servers – A vast majority of the web servers that run many web pages (including this one) are using Linux.

• Supercomputers – All of the top supercomputers use a Linux-based operating system.

• TV, Cameras, DVD players, etc. – Most of the appliances that use some form of a computer use Linux.

• Amazon – Many of the computers that help run Amazon use Linux.

• Google – Computers that help run Google and Google search results use Linux.

• Planes – Airplanes computers and screens you watch on the plane use Linux.

• U.S. Postal service – The computers and servers that help run systems to sort and manage mail in the U.S.

• NYSE – The New York Stock Exchange uses Linux to help run its exchange.

• LHC – The Large Hadron Collider uses Linux.

• OLPC – The One Laptop Per Child program used Linux on all its computers.

Who makes Linux now?

Thousands of organizations, corporations, and individuals help develop Linux and each of its various distributions. For more information, visit LinuxFoundation.org. You can read what’s happening right now in Linux development at LKML.org, the Linux kernel mailing list.

Linux distributions, flavors, and variants

Linux may be obtained in different ways. All the necessary components can be downloaded free of charge from the Internet, which means an operating system can be assembled for almost nothing. An alternative is to use a so-called distribution, a Linux variation offered by many companies. They include a broad range of applications and full programs that significantly simplify the installation of Linux.

There are hundreds of different distributions of Linux were released. Below are a few that we currently have listed on our site. A great site that lists almost every distribution, and rankings is DistroWatch.

System requirements

There are many variants of Linux, each with hardware requirements. Some can run on minimal systems with small amounts of RAM and disk space.

To run Linux, and your computer meets the following specifications, it should be able to run any variant of Linux.

• 64-bit Intel or AMD processor

• 1 GB RAM

• 10 GB of hard drive space

• CD/DVD drive or a USB (universal serial bus) port for installation

Keep Reading

Application

Best File Copy Utility Softwares for Windows 2024

By admin April 8, 2024

Best File Copy Utility Softwares for Windows 2024, Cut, copy, paste. Sounds familiar? Millions of us, transfer and copy files almost on a daily basis. Let us find out thus, some of the best file transfer software and file copy software for Windows.

If you notice, there might be typical days when we have spent not just one but a few hours in transferring files and copying files. But, let’s say a typical file is quite large, then what happens? Of course, it takes a longer time for transfer. Several developers have come up with different data copy software applications that help you avoid the errors coming up during the transfer or copy of large files/folders from one system to another in Windows.

What Are the Best File Copy Utility Software for Windows?

Let’s look at the detailed features of each of these best file transfer tools below:

1. File Fisher

This is one of the most portable file copy software that can be used for copying and transferring the files from one system to another. This is also one of the fastest file copying apps available in the market.

The best part of using this app is that you don’t have to download the app at all; instead you have to just drag it to your desktop and then simply run it in your system. In addition to it, you can also keep the app in your pen drive or your flash drive for smooth installation into your PC anytime. The interface is highly easy-to-use and quite interactive.

Since it supports a huge number of file formats, you can copy any file into your PC comfortably with the help of this app. Newcomers and experienced PC users can all use it easily and effectively.

Features of File Fisher

• File Fisher offers a simple yet unique user interface

• This file copy tool does not require any installation as it is a portable tool

• You can easily transfer files from one format to another easily

• The software is compatible with all the Windows OS even with the latest ones too

What Are the Best File Copy Utility Software for Windows?

Let’s look at the detailed features of each of these best file transfer tools below:

1. File Fisher

Since it supports a huge number of file formats, you can copy any file into your PC comfortably with the help of this app. Newcomers and experienced PC users can all use it easily and effectively.

Features of File Fisher

• File Fisher offers a simple yet unique user interface

• This file copy tool does not require any installation as it is a portable tool

• You can easily transfer files from one format to another easily

• The software is compatible with all the Windows OS even with the latest ones too

2. TeraCopy

Use TeraCopy as data copy software to copy files comfortably within folders or into Windows desktop. TeraCopy provides a robust and interactive interface. This app is extremely flexible and is one of the most fast running apps. TeraCopy is available freely as well as in a paid version. The free version of TeraCopy also has a lot of features that help successful copying of files from one system to another.

With TeraCopy you can comfortably evade those files that seem to be troublesome and still continue copying rather than stop for some corrupted files. If you’re wondering how would be the transfer over a network then let me tell you with the use of TeraCopy it is a lot easier and faster. You can drag and drop files that can prevent moving folders accidentally.

Features of TeraCopy

• It is one of the simplest file copy utilities

• The software automatically skips corrupted or problematic files

• It even repairs the corrupt file and recovers data

• You can easily drag and drop files from one drive to another

Reasons to use TeraCopy

• Skips corrupted files: With TeraCopy at your disposal, corrupted files cannot block the file transfer as the application skips them instead of halting the entire process.

• Fast and easy to use: The options like drag and drop, high customization, etc. make this app fast and friendly enough for both beginners and advanced users.

• Useful shell integration: TeraCopy boasts individual plugins, i.e., shell integration support to save your time and effort.

3. Fast Copy

The interface of Fast Copy is not one of the most efficient ones but the app is definitely one of the most efficient fast copy software for Windows. Fast Copy is freely available as a program and helps you move the files rapidly from one network to another.

To ensure enjoying the best speed, it employs multiple threads to read, write, verify and also uses the overlapped and direct I/O systems.

Due to the interface not everyone can use the app comfortably especially if you’re a novice, however, for an experienced PC user; it is indeed a wonderful copy software for Windows.

Features of Fast Copy

• It is one of the fastest file copying tools

• The software supports UNICODE and over MAX_PATH file pathnames

• It supports UNIX wildcard

• It uses multi-threads to bring out the best speed of devices

Reasons to use Fast Copy

• NSA File Wiping Support: One of the best things about Fast Copy is that it supports data sanitization methods approved by the National Security Agency (NSA) to keep your confidential information safe.

• Resource-friendly: This application does not bug your computer with unnecessary pressure on the resources as it is lightweight.

• Command-line: For the techies out there, it has command line and UI wrapper support.

4. ExtremeCopy

ExtremeCopy can help copy files from one system to another quickly. It can enhance the speed of the machine based on the physical structure of the machine. There are a lot of user-friendly features in the app. However, it would not support copying files from the network.

The program is capable of integrating with the Windows Explorer making it easier to use. Extreme Copy is not a software that supports file syncing but is one of the best file transfer software available.

Features of ExtremeCopy

• The software offers the freedom to pause and skip any file easily

• You can easily resume the interrupted process

• It comes with a built-in error management feature

• It is one of the best file transfer software for PC

Reasons to use ExtremeCopy

• Fast copying: It lets you copy files much faster (20% to 120% speedier) than the native Windows copy tool.

• Optimizations: ExtremeCopy can be a perfect choice for you, as it optimizes the copying speed and its resource consumption automatically.

• Efficient free version: We agree that the free version of this software has no high-end features. But, it does not reduce its functionality, and you get the same fast copying speed for free.

5. Unstoppable Copier

This app has been in use for a very long time. This file copy software functions at an enormous speed. Unstoppable Copier is a recovery solution that copies and transfers all your files from the directory.

The best part of it is that they also try to repair the faulty and damaged files. It works on any of the Windows operating systems except Windows 10. This is one of the best interactive Windows copy software that one can obtain.

Features of Unstoppable Copier

• The software lets you copy, recover and repair files easily

• It offers great speed transfer

• Being one of the oldest software it offers the best tools and speed

• It is compatible with most of the Windows OS

Reasons to use Unstoppable Copier

• Command-line support: If you are a techie who is not a fan of those graphical interfaces, you’ll be glad to know that this application supports command-line UI.

• Backup tools: There are backup options available such as creating and saving transfer lists for future use.

• Blazing fast: Unstoppable Copier is among the most high-speed copying tools available currently to copy files.

6. GS RichCopy 360

With GS RichCopy 360 copying many files from one system/folder to another is swift and quite easy.

In fact, there is a backup software with GS RichCopy 360 for MS Windows operating systems. This backup software can allow you to synchronize through the servers, Windows OS and also through various networks. You can always know and see all the copied tasks through a special Wizard interface available only with this tool.

Features of GS RichCopy 360

• It can be considered as the fastest file transfer software for Windows 7,8 and 10

• To help you check all the tasks it offers WIzard Interface

• It can easily transfer data between network

• You can share files, directories, or even drives effortlessly

Reasons to use GS RichCopy 360

• Byte-level replication: One thing that you might find highly useful in this application (that many other similar programs lack) is its ability to replicate files at the byte level.

• Supports long path names: Some files have really long path names (over 260 characters long). But, you don’t have to worry, as this software supports them all.

• Simultaneous file copying: It does not take a long time to copy files using this software as it copies files (up to 255 threads) simultaneously.

7. Perigee Copy 1.7

You can use this tool to copy the files from one system to another in the shortest amount of time.

If there are many files to copy from one server to another, then you know very well how long it takes to copy, if you use the default Windows copy function. Therefore, the Perigee Copy tool can offer a quicker solution.

It is an easy-to-use software with an interactive interface that is effective in so many ways. However, the drawback with Perigee is its incompatibility with Windows OS versions 8 and 10.

Features of Perigee Copy 1.7

• It offers a very easy to adapt interface which can be used by any user

• Apart from just copying files, you can delete them too

• You get many features like archive bit, overwrite, and others.

• It works perfectly for the Windows 7 and older versions

Reasons to use Perigee Copy 1.7

• Shell integration: With this software’s integration with the Windows menu, you can perform copy-paste tasks much more easily.

• Security: You get a confirmation message whenever you perform any action to inform you about the files that are going to be affected to take care of their security.

• Feature-rich: If you are looking for software that is a complete package with all essential features, like overwrite, etc., this program can be your best choice.

8. Copy Handler

For those users who are always transferring multiple files from one system to the other, Copy Handler can help immensely in transferring bulk files in less time.

It is a free to use app. Copy Handler operates at a faster rate, and aids in pausing, resuming, restarting and cancelling the different functionalities. It supports many languages at a time. You can transfer files between drives and computers in quite a less amount of time.

Drag and drop functions are also supported by the copy handler. To note, Copy Handler would resume the paused and unfinished copying of all files with a system restart. It is an extremely easy-to-use app and its effectiveness and flexibility is worth applauding.

Features of Copy Handler

• You can easily copy files in bulk using this best file copy software

• Easy drag and drop functionality for copying and moving files

• Even when the PC shutdown it pauses the process and can be easily resumed

• The software offers detailed statistics to help you understand better

Reasons to use Copy Handler

• Open source: One of the best things that make Copy Handler a perfect pick is that you can examine its code if the techie in you wants to do it.

• Complete control: You get full control over the entire copy/paste process and its speed.

• Queue support: Copy Handler has a unique feature that allows you to carry out multiple tasks at once in a specific order.

9. Robocopy

Robo Copy is not an app in actuality but rather a command-line utility to copy and transfer files from one server to another many times. Robo Copy replaces XCopy and has more offerings as a data copy software. If you have to run this utility, your command would be called Robo Copy.

It can work on Windows Vista and also on Windows 8. Robo Copy does not work on all PC’s as it does not have an interactive GUI.

Features of Robocopy

• Robocopy requires no additional tool for copying or transferring files

• Even when the network is interrupted the software performs great. It resumes when the connection is better

• Using the software you can skip files that are already copied

• You can easily transfer files and data from one server to another

Reasons to use Robocopy

• Error-free copying: Robocopy is a Windows command that does not make any error even when copying paths with over 259 to 32,000 characters.

• /MT feature: With this command, you can perform file copying in multithreaded mode.

• Wide availability: Being portable and compatible with almost all Windows versions, this tool is widely available.

10. EaseUS Disk Copy

Are you planning to copy an entire drive?

You can call it more like a drive cleaner since it copies a drive to another drive. EaseUS disk is quite fast as a data copy software and the best versions for file copy are available for Windows 7, 8 and 10.

It is an extremely precise app and can clone the entire disk with perfect precision and accuracy.

Features of EaseUS Disk Copy

• The software is compatible with all major Windows OS

• It is a fast software for copying or cloning the whole disk to a new location

• You can easily create a bootable disk with this software

• The software is accurate and performs copying with 100% accuracy

Reasons to use EaseUS Disk Copy

• Ease of use: To copy/paste files with this software, all you need to do is follow a simple three-step process.

• One-click migration: Using this software, you can migrate your data, apps, and complete OS to a new hard drive safely with just a click.

• Easy replacement: You can get EaseUS Disk Copy to use SSD instead of an HDD effortlessly.

11. UltraCopier

UltraCopier is an open source file copy software used to copy files. UltraCopier is very simple to use and has a multitude of premium features at your disposal for free. No matter how less versed you’re with a computer, you can always use this particular software without any difficulty.

There are some features like start, stop, resume that you can navigate through comfortably. You can perform a multitude of copy tasks from one server to another. It is also compatible with Linux and macOS.

Features of UltraCopier

• The software offers advanced features like speed limitations, pause, resume and stop

• You can easily perform multi-copy tasks

• It is compatible with Windows, Mac, and Linux

• UltraCopier has a built-in error management feature

Reasons to use UltraCopier

• Useful features: It offers some of the high-end features, such as speed controls and functionality to search in the copy lists.

• Customizations: If you are looking for a straightforward and customizable (with the plugin support) file copy utility, UltraCopier can be the best choice.

• Multilingual: UltraCopier boasts support for multiple languages and a portable form of the software.

12. MiniCopier

MiniCopier, a super-fast utility to copy files very quickly. It is a completely automatic utility for copying files. All you need to get started is – just drag and drop the files that you want to copy, in the red basket presented in the software’s window. And, then it will begin the rest procedure automatically. It has the standard buttons as well such as Pause and Start.

Though the user interface of this application is very simple, at the same time, it is very effective and productive too. Apart from this, it also keeps records of those transfers as well which gets dismissed. Overall, it is the best way to copy or paste files and folders in no time.

Features of MiniCopier

• You can queue all the transfers easily on this software

• The transfer speed can be set easily with MiniCopier

• You can pause and resume the process anytime

• Using the software you can easily change the name of the file

Reasons to use MiniCopier

• Queue support: The software supports queuing, where you can add a transfer to the queue when current transfers are ongoing.

• Greater control: With options like limiting the copy and transfer speed of files, MiniCopier lets you be in charge of the process.

• Behavior setting: MiniCopier allows you to specify a default target file behavior.

13. FF Copy

The next best file copy utility software for Windows in our list is FF Copy. It is a file transfer utility for Windows users. With this, you just only need to copy or paste the file to a transfer queue and then it will be copied in the sequence. Comparatively, it is way faster than other such kinds of utilities. FF Copy lets you transfer multiple files or folders simultaneously.

Just in case, if the source becomes unavailable then FF Copy automatically re-generates the source and starts transferring the files after a while. It allocates the disk space and eliminates disk fragmentation. FF Copy is highly capable of boosting the speed of the entire process. Undoubtedly, if you are searching for the best way to copy files pretty instantly then you should rely on this amazing utility.

Features of FF Copy

• The software offers a feature to add files in queue for ease

• You can easily pause and resume the process as per requirements

• During file transfer issue you can easily skip to the next file transfer

• It offers a detailed description of the process

Reasons to use FF Copy

• Portability: FF Copy is a portable software, hence no installation is required to run it.

• System friendly: This software does not burden your system unnecessarily, as its memory and CPU utilization remains low.

• Fast speed: With features such as queue support, this software lets you copy/transfer multiple files really quickly.

14. KillCopy

KillCopy is an excellent and fastest file-transferring software available for Windows PC. This utility tool makes the overall process of file copying much easier with a drag-and-drop feature. In order to ensure an error-free file-transferring process, KillCopy utilizes a high-speed verification mode.

Features of KillCopy

• It comes with a KillDelete option to erase the source file, once the copying process completes.

• Has a feature called Auto Resume functionality that automatically starts the file transfer process when the process abruptly stops.

• It’s Turbo Mode enhances the copying speed of large files.

Reasons to Use:

• Parallel: This mode boosts copy speed when copying files between different physical devices.

• Speed Limit: This feature lets you limit the maximum copy transfer speed in Kbps units.

• Turbo Mode: This mode can improve the overall speed of the file copying process, especially when copying large files between local disks.

15. NiceCopier

The next on our list of the best utilities to copy files and folders with NiceCopier. It is a quick and easy-to-use software that allows you to copy and paste data hassle-freely.

Moreover, it boasts many outstanding features, such as pausing and resuming the copy/paste process, an option to change the settings like running at startup, and much more.

Furthermore, below are its other features, pros, cons, and reasons to use it.

Features of NiceCopier

• A single window displays all the running tasks

• Calculates the best file copying speed

• Task queue creation to improve software performance

• Allows you to perform check-sum-based verification of files after copying them

Reasons to use

• Portable: One of the top reasons you should use NiceCopier is its portability. You can carry it in a flash drive and use it without downloading anything on the computer.

• Lightweight: NiceCopier does not pressurize your system resources and consumes very little space on the device.

16. Total Commander

Allow us to conclude this entire list of the best file copy utility software with Total Commander. Total Commander is not merely a copy utility but a smart file manager. With the help of the tool, you can run two windows side by side and use them to copy and move the data within the system and its storage. Let’s know more about this tool from the information below.

Features of Total Commander

• Custom columns

• Quick View panel

• Tabbed interface

• Built-in FTP client

• Thumbnails view

Reasons to use

• Thumbnail: One of the main reasons why you should download the Total Commander tool is that the tool offers a preview of the files in the form of thumbnails for ease of decision-making.

• Supports Multiple Archives: Total Commander supports various extensions of Archive files like CAB, ACE, TAR, GZ, RAR, UC2, ZIP, 7ZIP, etc.

17. Copywhiz

Copywhiz is another best file copy utility software that you can try. Just like any other software on this list, Copywhiz is a very advanced and a great utility to enjoy copying data smartly.

Features of Copywhiz

• Easy copying

• Handles multiple files

• Integration is possible

• Smart UI

Reasons to use

• Recent Files: The software allows you to copy and manage recently modified or added files with ease.

• Personalized: Copywhiz allows you to look for files and copy them according to the name or extension of the file.

18. SuperCopier

The next name on this list of the best file copy utility software for Windows 10/11 is SuperCopier. This is a simple tool that makes it feasible for you to copy data from one location to the other.

Features of Copywhiz

• Simplest file copying

• Smart UI

• Personalizable interface

Reasons to use

• Effective Performance: The software allows you to move or copy multiple files at once. Moreover, you also get lightning-fast copying speed with the tool.

• Smart UI: The user interface of SuperCopier is quite simple yet smart. Even a beginner can get the most out of the tool with ease.

19. OrganizerMaX

Here’s another addition to this list of the best file copy utility software for Windows. OrganizerMaX is multiple levels better than the traditional copy utility of Windows. Using this tool, you can add tags, copy and paste, search for files, and do a lot more with ease.

Features of OrganizerMaX

• Simple interface

• Modifiable

Reasons to use

• Reliability: The software offers some of the most advanced features for a copy utility.

• Fast: OrganizerMaX is quite fast as compared to any other tool offered in this list.

Final Words

These are some of the best file copy utility software available for Windows in 2024. Most apps are quite efficient in handling the speed with which the files are transferred from one server to the other or from one network to the other.

Bulk file transfers and copying is possible with some of these apps as well. Some can also help you transfer an entire folder from one server to another. With some apps you can avail many premium features whereas with other open source platforms you can enjoy splendid features free of cost.

Keep Reading

Windows

How to get Windows 11 for free

By admin February 18, 2024

How to get Windows 11 for free, Microsoft is still keen for everyone to upgrade to Windows 11 if they can. And it’s not just Microsoft. Updating to Windows 11 is well worth it. If you have a Windows 10 PC or laptop already, then you can upgrade to Windows 11 for free very easily, but you can also get it for free by buying a new PC, or even building a new computer yourself.

Whatever your situation, here’s how to upgrade to Windows 11 for free.

Check that your PC is compatible

Before you try to upgrade your PC to Windows 11 for free, make sure that it is compatible. You’ll need a PC that supports Trusted Platform Module (TPM) 2.0 and has the Secure Boot option in your BIOS. It must also meet some basic hardware requirements.

To find out whether your PC is capable of running Windows 11, search for PC Health Check in Windows search, and run the corresponding application, or check Microsoft’s Windows 11 specs page and cross-reference it with your system. If you’re not sure what hardware you have, follow these steps to check your PC specs.

Free Windows 11 upgrade

If you have a Windows 10 PC or laptop that’s ready for Windows 11, you can upgrade to Windows 11 for free just by running the update tool.

Step 1: Search for Windows Update in the Windows search bar and select the relevant result.

Image used with permission by copyright holder

Step 2: If your PC is fully up to date, there’s a good chance it will already be pushing the Windows 11 update on you. All you have to do is select the blue Download and Install button to get started. Then just follow the on-screen instructions to complete your Windows 11 installation.

Image used with permission by copyright holder

How to get Windows 11 for free

How to manually upgrade to Windows 11 for free

If Windows Update isn’t giving you a quick option to upgrade to Windows 11, you can use the Windows 11 Installation Assistant.

Step 1: Visit the Windows 11 download website and look for the Windows 11 Installation Assistant. Select the blue Download now button.

Step 2: When it’s finished downloading, run the Windows11InstallationAssistant.exe and give administrator approval, if requested.

Step 3: Select Accept and install to accept the terms and conditions, then begin the Windows 11 update process.

Step 4: The installation will then proceed without much input from you. It will download the Windows 11 installation media, then run the update. This could take up to 30 minutes, so you may need to wait, but when it’s complete, you should have a free update to Windows 11 installed.

How to download Windows 11 for free

If you are starting a new PC build, or want to install Windows 11 on a new drive for your existing Windows 10 PC, the Windows Update tool and Installation Assistant won’t work so well. What you can use instead is the Media Creation Tool, which will help you download Windows 11.

Step 1: Head to Microsoft’s Windows 11 upgrade page and under the heading Create Windows 11 Installation Media, select the blue Download Now button. This will download mediacreationtool.exe file to your PC.

Step 2: Launch the Media Creation Tool like you would any other program, and give administrator approval, if requested.

Step 3: Accept the Microsoft terms and conditions, then choose your language and the version of Windows 11 you want to install, if necessary. Otherwise, leave the default recommended options. Select Next when you’re ready to proceed.

Step 4: Find a USB drive with at least 8GB of free space and plug it into your PC or laptop. Then select the USB Flash Drive option in the Media Creation Tool setup process. Select Next.

Alternatively, if you want to virtually mount the Windows 11 installation media, you can select ISO file and follow the on-screen instructions to create it for later mounting.

Step 5: Select the USB drive you want to use for the installation. Then, when ready to setup the drive, select Next. Wait for the setup process to complete.

Step 6: Once the installation media is created, you can reboot your PC and boot to the USB drive to begin upgrading to Windows 11. Follow our guide on how to install Windows 11 for tips on the installation process and, if prompted, input your Windows 10 key to activate.

Get Windows 11 for ‘free’ when you buy a new PC

If you’re buying a new PC, you’re almost certainly going to get it with Windows 11 included, so if you don’t want to buy a Windows license and don’t have an upgradeable PC, this might be the best way. Alternatively, you can look for Windows 10 PCs and use their valid key to update to Windows 11 for free using the above methods.

Unfortunately, you can’t update from Windows 8 or Windows 7 straight to Windows 11, but if you have an older system with a valid key, you can always upgrade to Windows 10 first. Follow these steps on downloading Windows 10 for free, then see if you can update to Windows 11 for free afterwards.

How to download Windows 10 for free

When Windows 10 first arrived, nabbing a free upgrade was as simple as clicking the Get Windows 10 notification prompt. Things are a bit different now, however, especially with the new free upgrade to Windows 11 being around.

In addition to that, Microsoft no longer supports Windows 7, which means there’s no more technical support, security updates, or bug-squashing. In other words, Windows 7 is now unsafe to use, making this an excellent time to switch to Windows 10 or, switch to Windows 10.

Unfortunately, the original free upgrade period to Windows 10 ended years ago, and the workaround to get Windows 10 for free with Assistive Technologies ended not long after that. No need to worry, though — there are still ways to get Microsoft’s latest operating system without paying for a new license or breaking any rules.

With product keys and digital licenses

It would be best to have a valid product key or a digital license to get a free upgrade. What’s the difference? When you purchase an operating system from Microsoft or any retailer, it comes with a product key to unlock it. It’s printed and included in the packaging, emailed to you, or stored in the cloud, which is usually the case for system builders.

What is a digital license?

A digital license connects your installed Windows platform to a key embedded in prebuilt systems from Acer, Dell, HP, and so on. For a long time, these manufacturers printed product keys on labels stuck on PCs or printed and inserted them into product packaging. Microsoft’s product keys typically only work once, but hackers sometimes find workarounds to use the same key on multiple PCs.

That led Microsoft and manufacturers to introduce digital licenses in Windows 8 as an antipiracy measure, so end users aren’t installing the platform on additional machines. However, Microsoft also moved Windows 7 over to this method. This license becomes locked to your Microsoft account.

If you legitimately purchased and no longer use these older versions, Microsoft’s Windows 10 activation servers will accept Windows 7 and Windows 8.1 keys on your PC.

What if I can’t find my key?

However, if you’re upgrading from Windows 7 and can’t find the key, you can try signing in to your Microsoft account and checking past downloads to see if your product key is there. Sites like Amazon also keep a record of purchased downloads, but these rarely include the product key itself, though it may help narrow down where it could be.

Finally, you can download Windows 10 and perform a clean install. It will then pull the valid Windows 8/8.1 license key from your prebuilt system’s motherboard and move on. In all other cases, you must supply an authentic, genuine product key during the setup process, or you can do it later by visiting Settings > Update & security > Activation.

If you don’t have a valid Windows 7 license key, you must follow our other guide about how to upgrade from Windows 7 to Windows 10.

Using the Windows 10 Media Creation tool

Despite officially ending the free update promotion in mid-2016, Microsoft quietly keeps this option available so all Windows PC owners can run the latest version. Again, unless you have a valid digital license or product key to get a free upgrade, you will be required to pay for a new Windows 10 Home product key.

Step 1: Your first step in acquiring a free Windows 10 upgrade is to visit Microsoft’s download Windows 10 webpage.

Step 2: Select the Download tool now button.

You’ll see MediaCreationTool21H1.exe download onto your PC, which shouldn’t take longer than a minute to occur. Disconnect any unnecessary accessories to help reduce the chance of errors.

Step 3: Launch the Media Creation Tool.

Step 4: Once it is downloaded, open it, and accept Microsoft’s terms.

As shown above, you have two options: Upgrade the current PC, or create installation media that will either upgrade another PC or perform a clean install on the current PC. However, in both cases, the tool will temporarily download a disk image of Windows 10, so be sure you have enough space for the file — around 4GB, at least.

Step 5: Select the Upgrade this PC now option and follow the prompts. The tool will scan your computer to see if it’s compatible and may present a list of problematic programs or hardware that could stall the upgrade. If needed, uninstall programs to address the installer’s concerns.

Step 6: With all issues resolved, the installer will try to port over all the data it can. Keep in mind, however, the vast gap between Windows 7 and Windows 10 in terms of the software you use. If you’re ditching Windows 7 after using it for many years, you probably have a lot of data stored in files and apps. We can’t guarantee that all files and apps will be compatible with Windows 10, and some may stop working.

Step 7: It’s essential to be aware of this and prepare before upgrading. Back up or convert any crucial data before you continue.

Step 8: Finish installation.

Step 9: As the installer progresses, your PC will restart a few times. As part of the process, it will pull your existing digital license from your hardware during the setup — you won’t need to activate it. If prompted for a valid product key, enter it now or do so later by visiting Settings > Update & security > Activation.

Keep in mind that this won’t work for Windows XP or Windows Vista, as these versions of Windows never qualified for the free Windows 10 upgrade.

Step 10: You’ll also receive the same flavor of Windows that first shipped with your PC — Home, Pro, Enterprise, or Education. If you’d rather use Windows 10 Pro instead of the Windows 10 Home update, you must purchase a new product key.

Other methods for getting Windows 10

The above method is the best way to get Windows 10 for free — at least for now. There are other ways you can get Windows 10 if you need it, including free and low-cost options that may be worth exploring.

Upgrade from Windows 7

Buy a copy of Windows 10 from Microsoft. Please read our guide on how to upgrade from Windows 7 to Windows 10. Note that if you’re a student, or work at a large organization, you might be eligible for free or discounted Windows. Microsoft has more on that in a support page.

Download Windows 10 without activating

Technically, you can download Windows 10 from Microsoft and not activate it, which means you don’t pay for it. It turns out this is safer than it sounds because Microsoft is pretty lax about enforcing activation. Your copy of Windows shouldn’t shut down, but some limitations kick in after your 30-day evaluation:

• An Activate Windows watermark appears in the bottom-right corner.

• A Windows Isn’t Activated, Activate Windows Now notification appears in settings.

• Personalization features such as changing the wallpaper and accent colors are disabled.

• Updates may discontinue in the future.

• Various apps and features stop working.

• You’ll receive daily notifications to activate.

• No technical support.

We want to stress that using an unactivated version of Windows 10 is not permitted by Microsoft. Although it may appear like a fantastic steal (sounds about right), in reality, you’re breaking the rules and defying Microsoft’s licensing agreement. Microsoft would be completely within its rights to pursue legal damages against anyone using the Windows 10 OS unactivated, though they haven’t done so yet as far as we know. Better safe than sorry. In the end, if Microsoft wanted to stop people from using these versions, they could do it.

Buy a third-party Windows 10 key

You can find third-party vendors who sell Windows 10 manufacturer keys at a bargain. Going through these companies enables you to purchase the keys at half (or even lower) of the full Microsoft price. While it may sound like a scam, you can find reliable vendors who just happen to have a good price, but you need to stay on your toes. What customers need to do is hunt for trustworthy key vendors who offer incredible bargains. Easier said than done, though.

As you can guess, it is very much possible to still upgrade and get Windows 10 for free in 2022. You just need to follow our methods covered above — from using your existing Windows 7 or Windows 8.1 product key or even getting a license through work or school at no cost. Our tips and tricks are in line with Microsoft’s terms, too.

This means you don’t have to worry about if it is legal to get Windows 10 for free. And, if you’re worried about if you can upgrade to Windows 11 if you already got WIndows 10 for free, well, it’s just as easy and painless. Your upgrade to Windows 10 will give you a digital entitlement to Windows, which means if your hardware fits Microsoft’s requirements to run Windows 11, you can download Windows 11 at any time for no extra cost.

Keep Reading

Computer

How to download Windows 10 for free

By admin February 8, 2024

How to download Windows 10 for free, Windows 10 is the most widely used PC operating system in the world right now. Obviously, it’s a good idea to keep a USB memory stick, a DVD, or an ISO file with the Windows 10 setup handy. You may need it for various reasons, whether it’s reinstalling Windows 10 on your laptop or assisting friends in trouble, when their computers malfunction.

Or, why not, even for upgrading a very old Windows 7 or Windows 8.1 computer. If you want to know how and where to download Windows 10, don’t worry. Here are three ways to get Windows 10 for free and legally, regardless of whether you need to download a 64-bit or 32-bit full version.

1. How to download Windows 10 from Microsoft using the Media Creation Tool

The best option to obtain Windows 10 is to use a small program that Microsoft provides to everyone for free: the Media Creation Tool. This small application allows you to download Windows 10 as an ISO file or to create a DVD or a USB drive with Windows 10 on it. You can download the Media Creation Tool from the Windows 10 website.

The app provides a straightforward and user-friendly interface. It allows you to choose between 32-bit or 64-bit versions of Windows 10 and includes different editions like Windows 10 Pro and Home. For more guidance, you can check out our tutorial: Windows 10 Media Creation Tool: Create a setup USB stick or ISO.

Download: Media Creation Tool.

How to download Windows 10 for free

2. How to get Windows 10 free (full version) with Rufus

Using Rufus is another great way to download Windows 10. Rufus is a handy application that allows you to create bootable drives from image files. What many don’t know, however, is that you can also use it to download operating systems, including Windows 10. To get the most recent version of the software, visit the Rufus website.

Once you get Rufus on your computer, run it and make sure you allow it to check for updates. Otherwise, you won’t be able to download Windows 10.

Then, click or tap the small arrow next to the Select button.

This opens a small menu with two options: Select and Download. Choose Download instead of the default Select option.

That will initiate a small wizard where you can tell Rufus that you want to get Windows 10. Choose it from the Version list and click or tap on Continue.

The next steps of the Download ISO image wizard in Rufus are as clear as they can be. All you have to do is select the options you prefer and click/tap Continue to move on to the next ones.

You can choose the Release (there’s only one option here at the time of writing: version 22H2 v1), then select what edition (Home, Pro, and Education are all inside the same ISO), what language, and what architecture you want to download (Windows 10 64-bit or 32-bit). In the end, you get to download the full version of Windows 10 by pressing the Download button.

TIP: If you’re interested, here’s what the latest version of Windows 10 is, and how the Windows 10 editions are different from each other.

Once you press Download, you’re asked where you want to save the Windows 10 ISO file. Select a location on your computer, choose a name for the ISO or leave the default one, and click or tap on Save to begin downloading it.

Rufus then starts downloading Windows 10 on your PC. While the process is running, you can monitor its status at the bottom of the window.

When the download is over, you’ll find the Windows 10 ISO file saved in the location you specified earlier. Then, you can use it to create a bootable DVD or USB memory stick with the Windows 10 setup. If you need help with that, check out this guide: How to make a bootable USB drive with Windows, Ubuntu, or FreeDOS.

Download: Rufus.

3. How to get a Windows 10 download from a safe site, like Softpedia

The third method I can think of is to get a Windows 10 ISO from websites that offer software downloads. However, this option has the highest risk because many of these websites are not trustworthy, and some may even hide malware in the downloads they provide.

Sadly, most of the big download sites that are reliable, such as FileHippo, CNET, and MajorGeeks, don’t have direct links for downloading Windows 10 ISO files. The only website with a good reputation that I found offering direct downloads for Windows 10 ISO files is Softpedia. Go to it, look for Windows 10, and you should see the download options in the first results.

Download: Windows 10 on Softpedia.

What is your favorite way to download Windows 10?

If you want to get Windows 10 for free, legally, and without any risks, these are the options you have. Do you have any other suggestions on how to download Windows 10? Which method do you like the most? Do you use the official Media Creation Tool from Microsoft, or do you prefer Rufus when creating a Windows 10 USB memory stick? Let me know in the comments section below.

How to restart a Windows 10 computer

Sometimes, you need to restart your Windows 10 laptop or desktop PC simply to give it a fresh new start. Some other times, you may have to reboot because you just installed a new app or driver, or maybe because Windows 10 updated itself. Whatever the reason, there are plenty of ways to restart Windows 10, and they’re all quite simple. I have a list of eight different methods for you to choose from and I’m curious whether you know them all, or just a few of them. Here they are.

1. How to restart Windows 10 using the Start Menu

If you want to restart your Windows 10 computer, the easiest way is to use the Start Menu. First, open the Start Menu by clicking or tapping the Windows button in the bottom-left corner of the screen. Then, click or tap the Power button. From the options that appear, choose Restart to reboot your device.

If you have the Start Menu in full screen or you’re using Windows 10 on a tablet, things look a bit different. However, you can follow the same steps to restart your device: tap the Start button, go to Power, and tap Restart.

2. How to restart Windows 10 using the WinX menu

Another way to restart your PC is to use the power user menu, or the WinX menu for short. You can open it by pressing Windows + X on your keyboard or by right-clicking (or pressing and holding) the Windows button in the bottom-left corner of your screen. Then, choose “Shut down or sign out” and click or tap Restart.

TIP: The WinX menu is one of the most powerful things in Windows 10, out of the box. But did you know that you can make it even more useful by editing its options? Here’s how to edit WinX.

3. How to restart Windows 10 using Alt + F4

You may already know that pressing the Alt + F4 keys closes the current application or window you’re using. But did you know that you can also use this keyboard shortcut to restart Windows 10? All you have to do for that is to go to the desktop by pressing the Win + D keys, and then press Alt + F4 to open the Shut Down Windows dialog box. In it, select the Restart option from the dropdown menu and press Enter or click/tap OK to reboot your Windows 11 device.

TIP: The Shut Down Windows dialog also lets you sign out of your user account or switch to another one if that’s what you want.

4. How to restart Windows 10 from the command line

For those who love working with commands, there are ways to restart Windows 10 from the Command Prompt or PowerShell too. Moreover, some commands can also be executed directly from a Run window if that’s what you prefer. Here’s how it all works:

4.1. How to restart Windows 10 using the “shutdown” command

Open a Command Prompt, PowerShell or Run window, and type the command:

shutdown /r

Then press Enter on your keyboard to restart your Windows 10 laptop, tablet, or desktop computer.

Once triggered, the command makes Windows 10 display a warning window (“You’re about to be signed out”), and after a short while, your computer restarts.

Please note that closing the warning doesn’t stop the restart process.

4.2. How to restart Windows 10 using the PowerShell Restart-Computer command

If you prefer using PowerShell, you can also use this command to restart your Windows 10 device:

Restart-Computer

Once executed, the command instantly reboots your Windows 10 computer. There are no other warnings displayed.

Note that this command only works in PowerShell or in a PowerShell tab inside Windows Terminal. You can’t use it in Command Prompt or in the Run window.

5. How to restart Windows 10 from the lock screen

You can also restart your device from the lock screen: you can see this screen before logging into Windows 10 or if you sign out or lock your device. On it, press the I/O icon from the bottom-right corner and then click or tap the Restart option.

6. How to restart Windows 10 with Control + Alt + Delete

If you have a Windows 10 PC with a keyboard, a quick way to get to the power options is to simultaneously press the Control, Alt, and Delete keys on your keyboard. Once you do, look for the I/O button in the bottom-right corner of the screen. Click or tap on it, and you’ll see the usual power menu with Sleep, Shut down, and Restart. Choose Restart, and your Windows 10 computer will reboot.

TIP: There’s more to the Ctrl + Alt + Del screen than just power options. Here’s what Control Alt Delete is and what you can do with it.

7. How to restart Windows 10 using our Shut Down Windows shortcut

If you want to restart (or power off) your PC, you can also use our handy shortcut for the “Shut Down Windows” dialog box I’ve talked about in the third (Alt + F4) method of this guide. This shortcut is a little file we made for you, that works on any Windows machine, whether it’s Windows 10 or Windows 11. Here’s how to get it and use it: Download the shortcut for “Shut Down Windows”.

After you download it, run it, and it will instantly open the Shut Down Windows dialog box. In it, select Restart and either press Enter on your keyboard or click/tap the OK button.

8. How to restart Windows 10 using Simple Shutdown Scheduler

Last but not least, there’s also an app that I believe you’ll like: Simple Shutdown Scheduler. It can help you with scheduling or triggering immediate actions for shutting down or restarting Windows 10. Before installing it though, you will have to install the additional Windows 10 feature .NET Framework 3.5.

Then, open the app, go to the General tab, and pick the Restart action from the Immediate action dropdown menu. Once you do, hit the Go button next to it.

If you want to learn more about this app, check out this guide we published some time ago: Set your Windows PC to turn off or restart at certain time, with Simple Shutdown Scheduler.

How do you usually restart your Windows 10 computer?

You know now that there are many ways to reboot your Windows 10 device. Depending on what you prefer or need, you may use one or the other. Which one’s your favorite? Also, if you’re having any issues restarting your Windows 10 computer, feel free to leave a comment in the section below, and I’ll try to help.

How to start Windows 10 in Safe Mode with Networking

If your Windows is acting up or not booting at all, you may want to try Safe Mode to fix it. Safe Mode is a special way of starting Windows that only loads the essential stuff, so you can troubleshoot and repair the issues.

But sometimes, you need more than just the basics, like internet access. That’s where Safe Mode with Networking comes in handy. It’s a variation of Safe Mode that also lets you connect to the web and other networks. In this guide, I’ll show you how to start Windows 10 in Safe Mode with Networking using various methods, including from the command line and the graphical user interface of this operating system.

NOTE: This guide covers the ways in which you can boot Windows 10 into Safe Mode with Networking. If you’d like to know more about Safe Mode, what it is, and why it’s useful, you should read this article first: What is Safe Mode? Also, if you’re interested in starting your computer into standard Safe Mode without networking or internet access, read this tutorial instead: How to boot Windows 10 in Safe Mode.

What is Safe Mode with Networking in Windows 10? What’s the difference between Safe Mode and Safe Mode with Networking?

The default Safe Mode starts Windows using only a few core services and drivers to avoid as many issues as possible. Unfortunately, the downside is that the minimal Safe Mode doesn’t let you connect to the network or the internet, so you’re kind of isolated.

That’s where the Safe Mode with Networking environment comes in handy. If you need to use the internet while in Safe Mode to make it easier to troubleshoot your Windows 10 computer, you should try Safe Mode with Networking. This option lets you start Windows with only the essential services and drivers, but it also includes the networking components. However, keep in mind that this only works with wired Ethernet connections. Safe Mode with Networking doesn’t work with Wi-Fi. That’s because wireless cards need more complex drivers that are not loaded by Windows 10 when running in Safe Mode.

Safe Mode with Networking can be tremendously helpful when you need to download repair tools from the internet or when your computer is infected with malware and you must download and run antivirus tools that are up to date. Now let’s see how to boot into Safe Mode with Networking in Windows 10. I’ll first cover the ways to start Safe Mode with Networking when you can’t log in to Windows 10 and then the ones to use when you can sign in with your user account.

How to boot in Safe Mode with Networking when you can’t log in to Windows 10

Having trouble starting or logging in to Windows 10? You can still boot your computer into Safe Mode with Networking in order to fix the problem(s). Here’s how:

1. How to restart Windows 10 in Safe Mode with Networking using the Shift + Restart keyboard shortcut

One of the easiest methods to boot Windows 10 into Safe Mode with Networking is to restart it while keeping the Shift key pressed. Furthermore, you can do that from the sign-in or lock screen without having to actually sign in with a user account on your Windows 10 computer:

Boot your Windows 10 PC as you would normally do. When you get to the sign-in screen, press and hold the Shift key while clicking the Power button, and then Restart.

After a short while, you should see a blue screen with four options: “Continue (Exit and continue to Windows 10),” “Use a device (Use a USB drive, network connection, or Windows recovery DVD),” “Troubleshoot (Reset your PC or see advanced options),” and “Turn off your PC.” Click or tap the third one: Troubleshoot.

On the Troubleshoot screen, choose Advanced options.

On the Advanced options screen, click or tap on “Startup Settings (Change Windows startup behavior).”

Next, on the Startup Settings screen, click or tap on the Restart button.

After a short while, Windows 10 restarts and gives you some options for how it will boot up. To make it go into Safe Mode with Networking, choose option number five: “5) Enable Safe Mode with Networking”. To select it, either press the number 5 key or the F5 function key on your keyboard.

Your Windows 10 computer will now restart and boot into Safe Mode with Networking.

2. How to open boot into Safe Mode with Networking when Windows 10 shows a black screen

If Windows 10 fails to boot normally three times consecutively, it automatically enters Automatic Repair mode the next time you try to start it. You can access the Safe Mode with Networking from there. Trigger the Automatic Repair mode manually by interrupting the normal boot process three times over: use the reset or the power button on your Windows 10 computer to stop it during boot.

If you use the power button, you might have to keep it pressed for at least 4 seconds to force the power off. When your Windows 10 computer enters the Automatic Repair mode, the first thing you see is a screen letting you know that the operating system is “Preparing Automatic Repair.”

After a short while, the Automatic Repair tries to diagnose the problems that keep your Windows 10 PC from booting successfully.

When the Automatic Repair screen is loaded, click or tap on the Advanced options button.

Then, the “Choose an option” screen loads. Click or tap on Troubleshoot and take the same steps shown in this guide’s first method. In short, follow this path: Troubleshoot > Advanced options > Startup Settings > Restart > Enable Safe Mode with Networking (press the 5 or the F5 key).

3. How to restart in Safe Mode with Networking from the command line, with a Windows 10 installation disc or USB stick

If your PC doesn’t boot Windows 10, but you have access to another computer, you can use the working computer to create a Windows 10 installation DVD or USB memory stick. Download Windows 10 and create your own installation media. Then, insert the DVD or the USB memory stick into your non-working Windows 10 computer and boot from it. Wait for the Windows 10 setup wizard to load, and choose the language and keyboard layout you prefer. Then, click or tap Next.

On the next screen, don’t click/tap on Install now. Instead, look at the bottom left part of the wizard and click/tap on “Repair your computer.”

The screen called “Choose an option” loads. On it, click or tap Troubleshoot.

The Troubleshoot screen loads. On it, click or tap Advanced options.

A screen called Advanced options is loaded: click or tap “Command Prompt (Use the Command Prompt for advanced troubleshooting).”

To restart Windows 10 in Safe Mode with Networking from Command Prompt, run this command:

bcdedit /set {default} safeboot network

After you press Enter on your keyboard, the Command Prompt should state: “The operation completed successfully.”

Close the Command Prompt and then click or tap on “Continue (Exit and continue to Windows 10)”.

After your PC restarts, Windows 10 will boot into Safe Mode with Networking.

IMPORTANT: To get back to normal boot after you’ve finished repairs, follow the same steps, but run this command instead:

bcdedit /deletevalue {default} safeboot

4. How to start Windows 10’s Safe Mode with Networking from a recovery drive

If you already have a recovery disk or you create one on another Windows 10 computer, you can use it to boot your broken Windows 10 PC into Safe Mode with Networking.

Plug the recovery drive into your Windows 10 PC and use it to boot. The first screen you see asks you what keyboard layout you prefer to use. Click or tap on the one you want.

Then, on the “Choose an option” screen, click or tap on “Troubleshoot (Reset your PC or see advanced options.” The next steps are the ones shown in the first method from this guide. Essentially, you should follow this path: Troubleshoot > Advanced options > Startup Settings > Restart > Enable Safe Mode with Networking (press the 5 or the F5 key).

How to boot in Safe Mode with Networking when you can log in to Windows 10

If you want to boot your Windows 10 PC in Safe Mode with Networking, and you can still log in normally, here’s are your options:

5. How to start Windows 10 in Safe Mode with Networking using Shift + Restart

If you’re signed in to Windows 10, open the Start Menu. Press and keep the Shift key down, click the Power button, and select Restart.

After a short while, you should see a blue screen with four options: “Continue (Exit and continue to Windows 10),” “Use a device (Use a USB drive, network connection, or Windows recovery DVD),”, “Troubleshoot (Reset your PC or see advanced options),” and “Turn off your PC.” Click or tap on the third one – Troubleshoot – and then take the same steps shown in the first method of this guide. In short, go to Troubleshoot > Advanced options > Startup Settings > Restart > Enable Safe Mode with Networking (press the 5 or the F5 key).

6. How to reboot into Safe Mode with Networking using Windows 10’s Settings

You can also boot into Safe Mode with Networking if you use the Advanced startup settings from Windows 10. Start by opening the Settings app and then click or tap on the Update & Security section.

In the left sidebar, click/tap to select Recovery. On the right, click or tap the Restart now button from the Advanced startup section.

Then, Windows 10 loads the same “Choose an option” screen that I’ve shown in this guide’s previous methods. From here on, you should follow the same steps described earlier: Troubleshoot > Advanced options > Startup Settings > Restart > Enable Safe Mode with Networking (press the 5 or the F5 key).

7. How to boot Windows 10 into Safe Mode with Networking using msconfig (System Configuration)

Another easy way to boot a Windows 10 computer into Safe Mode with Networking is to use the System Configuration tool, otherwise known as msconfig.exe. Launch System Configuration: a fast way to do this is to type system configuration or msconfig in the search box on your taskbar and then click or tap System Configuration.

In the System Configuration window, click or tap the Boot tab. Check Safe boot in the Boot options section, and then choose Network.

After you click or tap on OK, Windows 10 pops up a notification saying that you must restart your computer to make the changes. If you want to go into Safe Mode with Networking right now, click/tap on Restart. Otherwise, choose to “Exit without restart,” and when you’re ready, restart your Windows 10 PC in Safe Mode with Networking manually.

When you restart, Windows 10 automatically enters Safe Mode with Networking. The first thing I found when that happened on my test computers was that Microsoft Edge launches automatically in this Safe Mode, loading the Windows help & learning website.

You can now use Microsoft Edge to navigate the internet and read help guides or download any repair tools you might need. Then, when you’re finished troubleshooting your PC, turn off Safe Mode with Networking by following the same steps in this chapter to disable the Safe boot setting from msconfig (System Configuration).

8. How to start Windows 10 in Safe Mode with Networking from Command Prompt with the shutdown command

The last method I know for starting Windows 10 in Safe Mode with Networking relies on Command Prompt. Open CMD and execute the following command:

shutdown.exe /r /o

This command triggers a reboot of Windows 10 into its recovery environment. Immediately after you execute it, Windows 10 notifies you that it will sign you out.

You will then see the Choose an option screen, just like in the previous chpaters of this guide. From here on, follow the same path as in the first chapter: go to Troubleshoot > Advanced options -> Startup Settings -> Restart. Then, press 5 or F5 on your keyboard to boot into Safe Mode Safe Mode with Networking.

That’s it!

Do you know other ways to boot Windows 10 in Safe Mode with Networking?

In this article, I covered all the methods I know for starting Windows 10 in Safe Mode with Networking. And as you’ve seen, there are multiple ways to do this, some more complicated than others. While I tried to be as comprehensive as possible, there may be others that I missed, so if you have any other ideas, please let me know in the comments section. Also, if you have any questions or issues regarding this subject, don’t hesitate to ask.

Keep Reading

Windows 8

How to download Windows 10 for free

1. How to download Windows 10 from Microsoft using the Media Creation Tool

How to download Windows 10 for free

2. How to get Windows 10 free (full version) with Rufus

3. How to get a Windows 10 download from a safe site, like Softpedia

What is your favorite way to download Windows 10?

How to restart a Windows 10 computer

1. How to restart Windows 10 using the Start Menu

2. How to restart Windows 10 using the WinX menu

3. How to restart Windows 10 using Alt + F4

4. How to restart Windows 10 from the command line

4.1. How to restart Windows 10 using the “shutdown” command

4.2. How to restart Windows 10 using the PowerShell Restart-Computer command

5. How to restart Windows 10 from the lock screen

6. How to restart Windows 10 with Control + Alt + Delete

7. How to restart Windows 10 using our Shut Down Windows shortcut

8. How to restart Windows 10 using Simple Shutdown Scheduler

How do you usually restart your Windows 10 computer?

How to start Windows 10 in Safe Mode with Networking

What is Safe Mode with Networking in Windows 10? What’s the difference between Safe Mode and Safe Mode with Networking?

How to boot in Safe Mode with Networking when you can’t log in to Windows 10

1. How to restart Windows 10 in Safe Mode with Networking using the Shift + Restart keyboard shortcut

2. How to open boot into Safe Mode with Networking when Windows 10 shows a black screen

3. How to restart in Safe Mode with Networking from the command line, with a Windows 10 installation disc or USB stick

4. How to start Windows 10’s Safe Mode with Networking from a recovery drive

How to boot in Safe Mode with Networking when you can log in to Windows 10

5. How to start Windows 10 in Safe Mode with Networking using Shift + Restart

6. How to reboot into Safe Mode with Networking using Windows 10’s Settings

7. How to boot Windows 10 into Safe Mode with Networking using msconfig (System Configuration)

8. How to start Windows 10 in Safe Mode with Networking from Command Prompt with the shutdown command

Do you know other ways to boot Windows 10 in Safe Mode with Networking?

How to set up Windows 11 Hyper-V virtual machines

Best dash cams 2024

Best free antivirus 2024